Aquapro irrigation timer controller

APPLICATION

– Aquapro irrigation timer controller used for garden or commercial premises.

– Aquapro is used in the absence of electricity such as remote control islands or gardens.

– When a wire cannot be connected.

– When the control system is overloaded.

– Install any indoor or outdoor.

FEATURES AND BENEFITS
– The battery power is started independently.
– Easy to use Aquapro irrigation timer controller.
– Netafim’s Aquapro has three independent programs:
+ P1 one cycle a day, run at the same time every day.
+ P2 one cycle per day and for multiple days.
+ P3 three cycles per day and set for multiple days.
– Aquapro has 2 modes.
+ OFF: stop all irrigation operations.
+ Instructions to start / disable programs.
– Aquapro has 2 types to choose from: ¾ ” and 1 ” BSP or NPT.
– IP67 water resistant material.
– Aquapro irrigation timer controller displaying multiple languages.

SPECIFICATION

Aquapro irrigation timer controller using Pin:

– 1 x 9V alkaline (not included, replaceable).

– Aquapro has a flash memory.

– Controller body – ABS.

– Standard – CE, IP67.

– Netafim’s Aquapro displays LCD screen in size – 38 X 31 mm.

– Seal – Satoprene.

– Output voltage – 13VDC.

– Length of electric pulse – 200 m / sec.

– Capacitance – 4700μF.

– Integration with Aquanet DC (¾ ”, 1”, 1½ ”, 2”) and CV 606 sensor.

Van AquanetPlus DC

– Aquapro has size: ¾ “or 1”.

– Tooth tip: BSP or NPT.

– The valve body is reinforced with nylon

– Control modes: open / auto / close.

– Aquapro is adjustable flow.

– Wet part: EPDM diaphragm, no metal parts.

– Cable connecting the valve and the controller: 0.6 m.

– The maximum length between the valve and the controller when using a 1.0mm cable is 100m (330 feet).

Weight	0.3 kg
Dimensions	13 × 12 × 13 cm

Aquapro irrigation timer controller

Related products

Login